After removing the seats and the wheelchair lifter, today we approached the task of removing the floor which is the first job that has to be done to have a “clean canvas” to start the conversion.
The heavy duty floor cover used in this van it is glued to the plywood. The glue did not become soft using the heat gun so brutal force was only the way.
Once removed the vinyl we drilled out the pop rivets that secure the plywood the van’s floor.
The next task will be to remove the wheelchairs anchor points that I was unable to do it alone because the nuts under neath are spinning so I would need help to hold the nuts when I unscrew the bolts from the top.